|
|
- power tower
- technical
- fitting
- common units
- pdf/print
The POWERTOWER through desk unit provides access at the worksurface for power and data in a stowaway unit. When not in use the POWERTOWER can be lowered out of sight. To use, the POWERTOWER is simply pulled up. In some circumstances POWERTOWER can be lowered while in use (please check with Office Electrics) The POWERTOWER top allows cables to exit from the port formed when the unit is retracted. Cap and grommet are available in black, or white.
All Office Electrics products are manufactured to enable compliance with BS6396 or BS7671 where relevant.
Configuration
Power only / Data only / Combined (Power & Data/AV)
Internal segregation between Power and Data/AV in combined PHOENIX
Fusing
5 x 20mm anti-surge ceramic fuses, with colour-coded fuseclips to denote the rating (3.15A/5A)
Earth Bonding
An external earth bonding lead is available on request
Insulation
Re-Inforced insulated body
Soft Wiring (power)
Power wired to Wieland ST/GST connector allows starter cables to be changed to suit requirements, especially useful during moves and changes (CHURN)
Testing
100% testing - continuity, polarity, insulation & earth
Finger pull
The finger pull aids easy raising and lowering of the Phoenix. The finger pull stows flat locking the Phoenix down Cap
For use as a cable grommet, the cap and bezel can be installed into the worktop without the Phoenix. The snap fit assembly of the cap onto the Phoenix allows flexibility on fitout planning, timing and reconfiguration.
Data outlets
A maximum of 4 data outlets can be mounted to the removable fascia, 2 x UK sockets (individually fused), Various audio visual outlets available please call for further details
Bezel clamp
Two ring pull devices with ratchet mechanisms, lock the bezel to the desk/table. Ring pulls shear off after fitting
Bezel
The bezel is clamped into the desk/table and acts as the cable pass through and a guide for the Phoenix. To fit the bezel, two 70mm holes are drilled at 65.2mm centres.
Guide rails & lock
The Phoenix slides easily on its guide rails and locks in the up position for access to power and data sockets
Power outlets
a maximum of two UK socket outlets, individually fused, are available

Installation and cutout details








